Unbox your badge printer and install it on the kiosk as shown in the video below:

​

For the Free-standing kiosk: we want to position the cords in a way that they are tucked behind the badge printer and up through the actual kiosk stand and hidden from plain sight. As shown in the above video.

We will be attaching the Badge Printer (With the label output face up) to the stand with the pre-attached "dual Lock" adhesive. Please make sure both cables are running directly behind the badge printer and in-between both adhesive pieces.

Remove the sticker from the adhesive on the back of the Brother badge printer and firmly stick the badge printer onto the front portion of the stand as seen in the video below:

Next, plug the 2 cords into the bottom badge printer.

Lastly, Plug the power cord into the wall outlet and the USB cord into the USB type-A port on the back of the screen

Note: badge labels are not provided by Striv360. To purchase badge labels, please click on the button below to see our guide with direct purchase links from leading retailers:

After the badge printer is properly installed, please reach out to us at [email protected] so we can enable badge printing for your kiosk.